Heatshield Products
Select Your Vehicle
35
Categories
| 6,365
Applications
Available
I-M Shield(TM) lowers intake combustion temperatures and create more power. These is not better dollar per RWHP power adder on the market today. Lowering intake manifold temps creates a denser fuel and air mixture, creating more power. Think of it as an intercooler for your intake, same physics, and chemistry just a different way to get there. The inner Kool Core(TM) insulation, combined with an 1100 aluminum make this one heavy duty peel and stick insulator for your intake manifold. There is not an easier or faster way to make horsepower than using the IM Shield by Heatshield Products. Heavy duty adhesive will stick to any clean semi-smooth surface. Simply degrease, clean surface, then wipe with pre-paint cleaner or isopropyl alcohol, let dry then firmly press the I-M Shield onto the underside of the intake manifold. Use provided edging tape to finish the install. It works on both composite and aluminum intake manifolds for late model and classic vehicles.
Show Universal
Product Details:
- Precut for Easy Installation, Lowers IAT's, Best $$ to RWHP around
- Stick on horsepower! I-M Shield increase horsepower buy protecting the intake manifold and reduces heat radiating up from the top motor. Lowering intake manifold temps creates a more dense fuel and air mixture, creating more power
$
102.70 USD
P311-11CF775 140022 Heatshield Products New
Free Ground Shipping on this item
Additional Fitment Information:
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2011 Chevrolet Corvette | V | 8 Cyl 7.0L | 427 | 7011 |
-
Features:
- Withstands 1100 Degrees F radiant continuous
- Best dollar per RWHP around
- Adhesive good for 300 Degrees F
- Lowers intake temperatures
- Conductivity Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
- Install Tips: Clean Surface Before Installation, Wipe With Pre-paint Cleaner
- Instructions Included: Yes
- Insulation Type: Radiant Heat Barrier, Needs 1 Inch Of Air Space, Should Not Contact Heat Source.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/i-m-shield
- Material: Aluminum/fiberglass
- Operating Temperature: 1100f
- Peak Temperature: 2200f
- Product Dimensions: Factory Ls7 Intake
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
I-M Shield lowers intake combustion temperatures and create more power. These is not better dollar ...
Read More About This
Engine Intake Manifold Heat Shield
Product Details:
- Reduces heat up to 70%, Easy to install, OEM Cast Manifold safe, paintable
- Reduce under hood temps by up to 40 percent with the easy to install heatshield blanket available for your headers: the Header Armor. It does not completely wrap the entire header, it is compliant with most header manufacturers' warranties.
$
207.85 USD
P311-59AF779 177006 Heatshield Products New
Free Ground Shipping on this item
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2010 Jeep Wrangler | Islander | Mexico |
-
Features:
- Header Armor is easily trimmed and wrapped around headers
- Long lasting and abrasion resistant, with a chemical-blocking aluminum layer
- Withstands a continuous 1800F continuous and 2200F intermittent
- Compliant with most header and exhaust manufacturer's warranties
- Add On: 1302ls1,69440,11500flt,69010,h8059,70-2265,4014,h8036,69230,12502flt,69090,h8021-1,11537flt,88400,11535flt
- Conductivity Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
- Electrical Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
- Install Tips: Inconel Wire
- Installation Tip: Inconel Wire
- Instructions Included: Yes
- Insulation Type:
- Product Can Be Placed In Direct Contact With Exhaust.
- Product Can Be Placed In Direct Contact With Heat Source.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/header-armor
- Material: Aluminum Bio-soluble Silica
- Operating Temperature: 1800f
- Peak Temperature: 2200f
- Product Dimensions: 1/4 Thk X 11 X 14 (x2)
- Prop 65 - Long Label: Warning: This Product Can Expose You To Chromium, A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Prop 65 - Short Label: Prop 2065ca.pdf
- Prop 65 (C, R or CR):
- Cr
- Warning - Both Cancer And Reproduction.jpg
- Prop 65 Warning Chemical Listing: Warning: This Product Can Expose You To Chromium, A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
- Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Don't let the heat of your engine make you sweat! You can reduce under hood temperatures by up to 40 ...
Read More About This
Exhaust Manifold Heat Shield
Product Details:
- Reduces heat up to 70%, Easy to install, OEM Cast Manifold safe, paintable
- Reduce under hood temps by up to 40 percent with the easy to install heatshield blanket available for your headers: the Header Armor. It does not completely wrap the entire header, it is compliant with most header manufacturers' warranties.
$
207.85 USD
P311-59AF779 177006 Heatshield Products New
Free Ground Shipping on this item
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2016 Jeep Wrangler | 75th Anniversary | Canada |
-
Features:
- Header Armor is easily trimmed and wrapped around headers
- Long lasting and abrasion resistant, with a chemical-blocking aluminum layer
- Withstands a continuous 1800F continuous and 2200F intermittent
- Compliant with most header and exhaust manufacturer's warranties
- Add On: 1302ls1,69440,11500flt,69010,h8059,70-2265,4014,h8036,69230,12502flt,69090,h8021-1,11537flt,88400,11535flt
- Conductivity Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
- Install Tips: Inconel Wire
- Instructions Included: Yes
- Insulation Type: Product Can Be Placed In Direct Contact With Exhaust.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/header-armor
- Material: Aluminum Bio-soluble Silica
- Operating Temperature: 1800f
- Peak Temperature: 2200f
- Product Dimensions: 1/4 Thk X 11 X 14 (x2)
- Prop 65 - Short Label: Prop 2065ca.pdf
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Warning: This Product Can Expose You To Chromium, A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Don't let the heat of your engine make you sweat! You can reduce under hood temperatures by up to 40 ...
Read More About This
Exhaust Manifold Heat Shield
Product Details:
- Precut for Easy Installation, Lowers IAT's, Best $$ to RWHP around
- Stick on horsepower! I-M Shield increase horsepower buy protecting the intake manifold and reduces heat radiating up from the top motor. Lowering intake manifold temps creates a more dense fuel and air mixture, creating more power
$
102.70 USD
P311-11CF775 140022 Heatshield Products New
Free Ground Shipping on this item
Additional Fitment Information:
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2008 Chevrolet Corvette | V | 8 Cyl 7.0L | 427 | 7011 |
-
Features:
- Withstands 1100 Degrees F radiant continuous
- Best dollar per RWHP around
- Adhesive good for 300 Degrees F
- Lowers intake temperatures
- Conductivity Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
- Electrical Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
- Install Tips: Clean Surface Before Installation, Wipe With Pre-paint Cleaner
- Installation Tip: Clean Surface Before Installation, Wipe With Pre-paint Cleaner
- Instructions Included: Yes
- Insulation Type:
- Radiant Heat Barrier, Needs 1 Inch Of Air Space, Should Not Contact Heat Source.
- Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/i-m-shield
- Material: Aluminum/fiberglass
- Operating Temperature: 1100f
- Peak Temperature: 2200f
- Product Dimensions: Factory Ls7 Intake
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
- Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
I-M Shield lowers intake combustion temperatures and create more power. These is not better dollar ...
Read More About This
Engine Intake Manifold Heat Shield
Product Details:
- Lava rock fiber, Prevent starter lock up, Prolongs starter life, Easy to install
- Engine(s)
- Lava Starter Shield is easy to install and typically doesn't require starter removal. Using heat-resistant and durable hook and loop fasteners. Protects the starter from constant temperatures as high as 1200F, and short-term temps 2,000F.
$
68.46 USD
P311-1C1EAC3 501071 Heatshield Products New
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2022 Jeep Wrangler | Islander | United States |
-
Features:
- Patented Heatshield thermal barrier technology withstands constant temps up to 1,200 degrees Fahrenheit and short-term exposure to 2,000 degrees
- Protects starter motor and solenoid from damaging heat
- Installs in minutes, typically without requiring starter removal
- Naturally water, chemical and acid resistant
- Add On: 9100,9000,9509,9063,9526,9612,9400,9606,9112,9162,9103,9503,9300,9605,5095,9051,9109,9500,9600,ts400,ts400dp,ts500,ts408,9532
- Install Tips: Velcro
- Installation Tip: Velcro
- Instructions Included: No
- Insulation Type:
- Product Can Be Placed In Direct Contact With Heat Source.
- Product Can Be Used As A Radiant Heat Barrier Or Placed Directly On Heat Source Up To 1200f
- Item Related HPI SKUs: 177004, 372050, 282020, 501010
- Manufacturer Product Link: Https://www.heatshieldproducts.com/basalt-starter-shield
- Material: Volcanic Rock Fiber
- Operating Temperature: 1200f
- Peak Temperature: 2000f
- Product Dimensions: 3-1/2 X 18 In
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
- Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Heat-cooked starter motors and starter solenoids are a thing of the past, thanks to the Heatshield P ...
Read More About This
Starter Heat Shield
Product Details:
- Lava rock fiber, Prevent starter lock up, Prolongs starter life, Easy to install
- Engine(s)
- Lava Starter Shield is easy to install and typically doesn't require starter removal. Using heat-resistant and durable hook and loop fasteners. Protects the starter from constant temperatures as high as 1200F, and short-term temps 2,000F.
$
68.46 USD
P311-1C1EAC3 501071 Heatshield Products New
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2021 Jeep Wrangler | Unlimited High Altitude 4xe | United States |
-
Features:
- Patented Heatshield thermal barrier technology withstands constant temps up to 1,200 degrees Fahrenheit and short-term exposure to 2,000 degrees
- Protects starter motor and solenoid from damaging heat
- Installs in minutes, typically without requiring starter removal
- Naturally water, chemical and acid resistant
- Add On: 9100,9000,9509,9063,9526,9612,9400,9606,9112,9162,9103,9503,9300,9605,5095,9051,9109,9500,9600,ts400,ts400dp,ts500,ts408,9532
- Install Tips: Velcro
- Instructions Included: No
- Insulation Type: Product Can Be Used As A Radiant Heat Barrier Or Placed Directly On Heat Source Up To 1200f
- Manufacturer Product Link: Https://www.heatshieldproducts.com/basalt-starter-shield
- Material: Volcanic Rock Fiber
- Operating Temperature: 1200f
- Peak Temperature: 2000f
- Product Dimensions: 3-1/2 X 18 In
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Heat-cooked starter motors and starter solenoids are a thing of the past, thanks to the Heatshield P ...
Read More About This
Starter Heat Shield
Product Details:
- Protects filters from heat, Lower oil temps, Easy to install, MagnaMount system
- Engine(s)
- Lava Oil Filter Shield protects oil filters from ambient heat and road debris. Lava Oil Filter Shield can withstand constant temps of 1,200-degrees F and intermittent temps up to 2,000-degrees, and it is oil, solvent and water resistant.
$
96.57 USD
P311-25CEFFE 504701 Heatshield Products New
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2018 Dodge Charger | SRT Hellcat | Mexico |
-
Features:
- Withstands 1,200 degrees F continuous, 2,00 degrees F intermittent
- Special design allows for easy install and removal for reuse after oil changes
- Includes magnets which holds the shield in place and traps metal debris in the filter
- Water, oil and solvent resistant
- Install Tips: Magnamount
- Installation Tip: Magnamount
- Instructions Included: No
- Insulation Type:
- Product May Have Occasional Contact With Heat Sources Of 400f, Radiant Heat Up To 1200f
- Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/oil-filter-heat-shield
- Material: Lava
- Operating Temperature: 1200f
- Peak Temperature: 2000f
- Product Dimensions: 3.625 Id X 3.500 In Tall
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
- Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Oil filters are often located in close proximity to hot headers in an area of the vehicle that doesn ...
Read More About This
Engine Oil Filter Heat Shield
Product Details:
- Protects filters from heat, Lower oil temps, Easy to install, MagnaMount system
- Engine(s)
- Lava Oil Filter Shield protects oil filters from ambient heat and road debris. Lava Oil Filter Shield can withstand constant temps of 1,200-degrees F and intermittent temps up to 2,000-degrees, and it is oil, solvent and water resistant.
$
96.57 USD
P311-25CEFFE 504701 Heatshield Products New
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2015 Dodge Charger | SRT Hellcat | United States |
-
Features:
- Withstands 1,200 degrees F continuous, 2,00 degrees F intermittent
- Special design allows for easy install and removal for reuse after oil changes
- Includes magnets which holds the shield in place and traps metal debris in the filter
- Water, oil and solvent resistant
- Install Tips: Magnamount
- Instructions Included: No
- Insulation Type: Product May Have Occasional Contact With Heat Sources Of 400f, Radiant Heat Up To 1200f
- Manufacturer Product Link: Https://www.heatshieldproducts.com/oil-filter-heat-shield
- Material: Lava
- Operating Temperature: 1200f
- Peak Temperature: 2000f
- Product Dimensions: 3.625 Id X 3.500 In Tall
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Oil filters are often located in close proximity to hot headers in an area of the vehicle that doesn ...
Read More About This
Engine Oil Filter Heat Shield
Product Details:
- Protects filters from heat, Lower oil temps, Easy to install, MagnaMount system
- Lava Oil Filter Shield protects oil filters from ambient heat and road debris. Lava Oil Filter Shield can withstand constant temps of 1,200-degrees F and intermittent temps up to 2,000-degrees, and it is oil, solvent and water resistant.
$
96.57 USD
P311-5DF80CA 504703 Heatshield Products New
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2017 Chevrolet Camaro | LT | Canada |
-
Features:
- Withstands 1,200 degrees F continuous, 2,00 degrees F intermittent
- Special design allows for easy install and removal for reuse after oil changes
- Includes magnets which holds the shield in place and traps metal debris in the filter
- Water, oil and solvent resistant
- Install Tips: Magnamount
- Installation Tip: Magnamount
- Instructions Included: No
- Insulation Type:
- Product May Have Occasional Contact With Heat Sources Of 400f, Radiant Heat Up To 1200f
- Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/oil-filter-heat-shield
- Material: Lava
- Operating Temperature: 1200f
- Peak Temperature: 2000f
- Product Dimensions: 2.94 Id X 3.25 In Tall
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
- Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Oil filters are often located in close proximity to hot headers in an area of the vehicle that doesn ...
Read More About This
Engine Oil Filter Heat Shield
Product Details:
- Protects filters from heat, Lower oil temps, Easy to install, MagnaMount system
- Engine(s)
- Lava Oil Filter Shield protects oil filters from ambient heat and road debris. Lava Oil Filter Shield can withstand constant temps of 1,200-degrees F and intermittent temps up to 2,000-degrees, and it is oil, solvent and water resistant.
$
96.57 USD
P311-5DF80CA 504703 Heatshield Products New
Additional Fitment Information:
| Vehicle | Submodel | Region |
|---|---|---|
| 2012 Chevrolet Corvette | Base | Canada |
-
Features:
- Withstands 1,200 degrees F continuous, 2,00 degrees F intermittent
- Special design allows for easy install and removal for reuse after oil changes
- Includes magnets which holds the shield in place and traps metal debris in the filter
- Water, oil and solvent resistant
- Install Tips: Magnamount
- Installation Tip: Magnamount
- Instructions Included: No
- Insulation Type:
- Product May Have Occasional Contact With Heat Sources Of 400f, Radiant Heat Up To 1200f
- Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/oil-filter-heat-shield
- Material: Lava
- Operating Temperature: 1200f
- Peak Temperature: 2000f
- Product Dimensions: 2.94 Id X 3.25 In Tall
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
- Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
About Heatshield Products
Oil filters are often located in close proximity to hot headers in an area of the vehicle that doesn ...
Read More About This
Engine Oil Filter Heat Shield
