Edelbrock

Select Your Vehicle
Edelbrock Performer EPS Series 1406 carburetor calibration kit
- Performer Carburetor Calibration Kit #1487 for #1406 Carburetors
- For PN[1406] Carburetor Metering Rods 0.070 x 0.037/0.073 x 0.042/0.073 x 0.047 Metering Jets 0.095/0.098/0.101 For Use On Pre-Pollution Controlled Vehicles (PPCV)
- Edelbrock Performer EPS Series 1406 carburetor calibration kit
P311-02C1D26 1487 Edelbrock New
Vehicle | Engine VIN | Engine Version |
---|---|---|
1972 Ford Ranchero | R | Cleveland Boss |
- Metering Jet Size: .095, .098, .101
- Metering Rod Size: .070 X .037, .073 X .042, .073 X .047
- Quantity: Kit
- Recommended Use: Fits With Part #1406
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Spring Force: 3" Hg (blue); 4" Hg (yellow); 5" Hg (orange); 7" Hg (pink); 8" Hg (silver)
- Edelbrock Chevrolet SB Performer EPS Manifold with Gaskets, Bolts, Studs
- Inc. Intake Manifold PN[2701]/Intake Gasket PN[7201]/Intake Bolt Kit PN[8504]/Carb Stud Kit PN[8008]/Carb Base Gasket/RTV Sealant For Use On Pre-Pollution Controlled Vehicles (PPCV)
- Edelbrock Manifold Installation kit PN 2040 includes all the necessary components to replace your existing intake: PN 2701 Performer EPS intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts & carb studs.
P311-2264B5A 2040 Edelbrock New
Vehicle | Engine Version | Block | Engine | CID | CC |
---|---|---|---|---|---|
1978 Pontiac Parisienne | Chevrolet | V | 8 Cyl 5.0L | 305 | - |
- Angle: (carb) 3
- Basic Operating RPM Range: Idle-5500
- Bolts Or Studs Included: Yes
- Carburetor Quantity: One
- Center Maximum Height: (carb Pad) 4.27
- CNC Ported: No
- Deck Height: Standard
- EGR Port: No
- Family: Performer
- Fastener Material: Steel
- Flange Type: 4150
- Front Maximum Height: (a) 4.45
- Gasket Or Seal Included: Yes
- Intake Manifold Type: Part #2701
- Mounting Hole Diameter: (carb Bolt) 5/16-18 Unc
- Mounting Hole Quantity: (carb Bolt) 4
- Port Exit Dimensions: 1.15 X 1.87
- Quantity: Kit
- Rear Maximum Height: (b) (measured To Engine Block) 4.80
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chevrolet
- Performer Buick 3.8L, 4.1L V6 Intake Manifold
- Satin Finish Non-EGR Idle-5500rpm For 4 bbl Carbs w/Late Model Cyl. Heads Even Fire~ For Use On Pre-Pollution Controlled Vehicles (PPCV)
- Edelbrock Performer GM V6 Engines Intake Manifold
P311-2EB8ECA 5486 Edelbrock New
Vehicle | Engine Version | Block | Engine | CID | CC |
---|---|---|---|---|---|
1977 Oldsmobile Delta 88 | Buick | V | 6 Cyl 3.8L | 231 | 3800 |
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 5.060
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 4.670
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 4.450
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Buick
- Pro-Flo 4 EFI XT-Style Kit #35810 For 1986 & Earlier Chevy Small-Block
- Edelbrock Pro-Flo 4 XT EFI System for 1986 & Earlier Small-Block Chevy engines. The EFI system comes with a satin finish Pro-Flo XT intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure.
P311-1268729 35810 Edelbrock New
Vehicle | Fuel Type | Block | Engine | CID | CC |
---|---|---|---|---|---|
1970 Chevrolet Impala | GAS | V | 8 Cyl 6.6L | 400 | - |
- Distributor Cap Included: Yes
- Flange Type: Xt-style
- Fuel Injector Type: 35 Lb/hr
- Fuel Pressure Port: 1/8-27 Npt
- Gasket Or Seal Included: Yes
- Manifold Height: A-9.2 In, B-8.4 In, C-16.9 In, D-2.1 In, E-0 Degrees
- Maximum Horsepower: 550
- Quantity: Kit
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- System Type: Xt-style Kit
- Throttle Body Type: Single Blade
- Wire Harness Included: Yes
- Wiring Harness Included: Yes
- EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706
- Allows EGR Valve To Clear PN[1400] Carb On PN[3701/3706] Manifolds
- Edelbrock EGR Adapter #1476 has made installing your new intake and carburetor easier when using part #3701 and #3706.
P311-1B313B5 1476 Edelbrock New
Vehicle | Engine Version | Block | Engine | CID | CC |
---|---|---|---|---|---|
1979 GMC Jimmy | Chevrolet | V | 8 Cyl 5.7L | 350 | - |
- Gasket Or Seal Included: 2 Gaskets
- Quantity: Kit
- Recommended Use: For Edelbrock Part # 3701, 3706
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Pro-Flo 4 EFI Traditional 4150-Style Kit #35690 For Chevy Small-Block
- Edelbrock Pro-Flo 4 EFI System for 1986 & Earlier Small-Block Chevy engines. The EFI system comes with a 4150-Style satin finish single plane intake manifold and 42 Lb/Hr injectors capable of 675 HP.
P311-189904D 35690 Edelbrock New
Vehicle | Fuel Type | Block | Engine | CID | CC |
---|---|---|---|---|---|
1979 GMC C5000 | GAS | V | 8 Cyl 5.7L | 350 | - |
- Bore Diameter: 1.75
- Distributor Cap Included: Yes
- Flange Type: 4150
- Fuel Injector Type: 42 Lb/hr
- Fuel Pressure Port: 1/8-27 Npt
- Gasket Or Seal Included: Yes
- Idle Air Control Motor Included: Yes
- Manifold Height: 4.58
- Maximum Horsepower: 675
- Quantity: Kit
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- System Type: Traditional 4150-style Kit
- Throttle Body Type: 4 Barrel
- Wire Harness Included: Yes
- Wiring Harness Included: Yes
- Water Pump Cartridge for Small-Block Chevy
- For Water Pump PN[8827]
- Edelbrock #8828 Water Pump Small Block Chevy Cartridge Style Race Designed For Circle Track And Endurance Racing Applications
P311-30341C2 8828 Edelbrock New
Vehicle | Engine Version | Block | Engine | CID | CC |
---|---|---|---|---|---|
1956 Chevrolet Bel Air | U/K | V | 8 Cyl 4.3L | 265 | 4343 |
- Casting Number: 8827
- Fan Clutch Included: No
- Hub Hole Quantity: 6
- Impeller Material: Powdered Metal
- Impeller Rotation: Standard
- Impeller Vane Quantity: 6
- Includes Back Housing: No
- Installation Warnings: Yes
- Mounting Hardware Included: No
- Mounting Hole Quantity: 6
- Pulley Included: No
- Related Cooling Fan Components: No
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Thermostat And Housing Included: No
- Water Pump Drive Type: V-belt
- Torker II Intake Manifold Small-Block Chevy
- Non-EGR 2500-6500rpm 4 bbl Carb Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Will Fit Corvette and 87 and Later Stock Heads
- Edelbrock Torker II Intake Manifold For Chevrolet 262-400 Small-Block V8
P311-42407D5 5001 Edelbrock New
Vehicle | Engine Version | Block | Engine | CID | CC |
---|---|---|---|---|---|
1960 Chevrolet Biscayne | U/K | V | 8 Cyl 4.6L | 283 | - |
- Basic Operating RPM Range: 2500-6500
- Center Maximum Height: 4.080
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 3.530
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 4.630
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Single
- Vehicle Model: Chevrolet
- Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish
- Polished Finish Idle-5500 rpm Non-EGR Dual-Plane Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
- Edelbrock Performer EPS Intake Manifold For Chevrolet 262-400 Small-Block V8
P311-2C982F3 27011 Edelbrock New
Vehicle | Engine Version | Block | Engine | CID | CC |
---|---|---|---|---|---|
1977 GMC K35 | Chevrolet | V | 8 Cyl 5.7L | 350 | - |
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 4.270
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 3.740
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 4.800
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chevrolet
- Performer EPS Intake Manifold with Oil Fill Tube for 1955-86 Small-Block Chevy
- Cast Finish Idle-5500rpm Non-EGR Dual-Plane w/Oil Fill Tube Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
- Edelbrock Performer EPS Intake Manifold with Oil Fill/Breather Tube for 1955-86 262-400 Small-Block Chevrolet V8's, Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.
P311-00FB9BF 2703 Edelbrock New
Vehicle | Engine Version | Block | Engine | CID | CC |
---|---|---|---|---|---|
1970 Chevrolet G20 Van | U/K | V | 8 Cyl 5.0L | 307 | - |
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 4.270
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 3.740
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 4.800
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chevrolet