Design Engineering
Select Your Vehicle
Glass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Catalytic Convertors: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Removal: Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Titanium Exhaust Pipe Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields.
- Exhaust Wrap
- Exhaust Wrap; 2 ft. x 25 ft.; Black;
P311-1AEDC5E 10099 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Reduce Under Hood Temperatures a Realistic 50 Percent
- Decreases Exhaust Density And Increases Exhaust Flow
- Improves Horsepower
- Withstands 1200 Degrees F Direct/2000 Degrees F Radiant
- Added Durability And Heat Retention
- Only Exhaust Wrap With Installation Guide Lines
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Heat Sheath™
- Heat Sheath™; 1 1/4 in. x 36 in.; Aluminized Sleeving; Sewn;
P311-58CC7E9 10404 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
- Pliable For Tight Bends
- Trim To Desired Length
- Inside Diameter: 1.250 In.
- Max Temperature Rating: 500 Degree
- Product Length: 3 Ft.
- Size: 1.250 In.
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Fire Sleeve/Tape Kit™
- Fire Sleeve/Tape Kit™; 3/8 in. Inner Diameter x 36 in.;
P311-2A5230A 10470 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- 3/8 in. x 3 ft Length Of Fire Sleeve
- Includes 16 in Length Of Fire Tape
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- Electrical Wiring Etc.
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Protect-A-Boot™
- Protect-A-Boot™; 6 in.; Black; 8 Pack;
P311-22443FD 10512 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Withstands 1200 Degrees F Direct Continuous Heat
- Helps Prevent Burn-Through/Hardening And Cracking Of Boots
- Universal-Fits Most Straight Or Angled Boots
- Installs In Seconds
- Double-Wall Construction For Added Durability
- Non Flammable/Protects Against Chemicals/Resists Water
- Reinforcement Ring For Easy Plug Removal During Maintenance
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Sensor Plug Thermal Cap
- Sensor Plug Thermal Cap; 62 mm I.D. x 2 in.; 63.2 O.D.;
P311-40484EA 10758 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Aluminized Insulation Reflects Heat
- Act As A Thermal Barrier For Sensitive Wire Connections
- Simple To Install With A Split Top And Can Be Nested To Fully Cover Connectors
- Three Sizes - 25-32-62mm ID
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- LED Lite N Boltz™ License Plate Lighting Kit
- LED Lite N Boltz™ License Plate Lighting Kit; 4 pc.; Satin;
P311-4FDD972 30301 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Meets Legal Requirements w/o Compromising Looks
- Made Of HIGH Grade Stainless Steel
- Offers Superior Lighting
- Clear Epoxy Covered Lens-Waterproof Protection
- .30MA Current/0.36 Watts
- Lights Instantly
- Perfect For License Plate Relocation Projects
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Black Titanium™ Exhaust Wrap
- Black Titanium™ Exhaust Wrap; 2 in. x 50 ft.;
P311-29D194E 10003 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Extremely Pliable For A Tight And Secure Wrap
- Less Irritating To Skin
- Pre-Wetting Roll Not Necessary For Wrapping
- Withstand More Temperature Than Fiberglass Wraps
- Black Carbon Fiber Look
- Reduce Underhood Temps
- Made in USA
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Black Titanium™ Exhaust Wrap
- Black Titanium™ Exhaust Wrap; 2 in. x 25 ft.;
P311-410369A 10004 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Extremely Pliable For A Tight And Secure Wrap
- Less Irritating To Skin
- Pre-Wetting Roll Not Necessary For Wrapping
- Withstand More Temperature Than Fiberglass Wraps
- Black Carbon Fiber Look
- Reduce Underhood Temps
- Made in USA
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Pipe Wrap And Locking Ties Kit
- Pipe Wrap And Locking Ties Kit; 2 in. x 25 ft.; Black;
P311-0E8F17E 10119 Design Engineering New
This product is not application specific
This is a general purpose item, or a universal product, or requires additional fitment checks for your vehicle, outside of year, make, and model.
-
Features:
- Wrap Header Tubes To Protect Plug Wires
- Wrap Downpipes To Improve Velocity
- Wrap Exhaust/Tail Pipe To Reduce Heat
- Wrap Motorcycle Pipes To Prevent Leg Burns
- Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Fuel Rail And Cover Kit;
P311-01113A3 10378 Design Engineering New
| Vehicle | Submodel | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2003 Jeep Wrangler | Sport | L | 6 Cyl 4.0L | 242 | - |
