Bell Tech
Select Your Vehicle
In 1983, Belltech developed one of the industry's first revolutionary products to help jump start the Sport Truck craze, the Drop Spindle. By relocating the spindle pin (Note: Application, while improving handling and retaining factory ride quality. Belltech spindles maintain critical suspension geometry and eliminate excessive ball joint, shock and tire wear common to other methods of lowering. Each spindle is crafted from powdercoated, CNC machined, high strength ductile iron castings providing the structural integrity to meet and exceed all factory specifications & requirements.
- 2" Drop Spindle Set
- Lowering Rate: F: 2.0"
- The industry standard, Belltech drop spindles can be combined with coilover or air suspension set ups for the ultimate in street performance or frame laying stance. Lifetime warranty, direct bolt in, application specific.
P311-53941BD 2000 Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1987 Toyota Pickup | SR5 | 2 | Extended Cab Pickup | RWD | United States | N/A | Fleetside | L | 4 Cyl 2.4L | - | 2366 |
- 2" Drop Spindle Set
- Lowering Rate: Lowering Rate: F: 2.0"
- The industry standard, Belltech drop spindles can be combined with coilover or air suspension set ups for the ultimate in street performance or frame laying stance. Lifetime warranty, direct bolt in, application specific.
P311-53941BD 2000 Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1984 Toyota Pickup | Base | 2 | Standard Cab Pickup | RWD | United States | N/A | Fleetside | L | 4 Cyl 2.4L | - | 2366 |
- Independent Compression & Rebound Adjustable Dampers
- Lowering Rate: R: 0.0-4.0"
- Unleash your trucks potential! Belltech coilover kits offer a out of the box, ready to install, height adjustable solution to replace your lackluster underwhelming stock strut suspension.
P311-52F3FFB 17004 Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2018 Ram 1500 | Express | 4 | Crew Cab Pickup | RWD | United States | 67.4 | Fleetside | Rear | V | 8 Cyl 5.7L | 345 | - |
- Independent Compression & Rebound Adjustable Dampers
- Lowering Rate: R: 0.0-4.0"
- Unleash your trucks potential! Belltech coilover kits offer a out of the box, ready to install, height adjustable solution to replace your lackluster underwhelming stock strut suspension.
P311-3A9A3AE 17013 Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2015 Jeep Wrangler | Unlimited Sport | 4 | Sport Utility | 4WD | United States | N/R | N/R | Rear | V | 6 Cyl 3.6L | 220 | 3604 |
- 2" Drop Spindle Set
- Lowering Rate: F: 2.0"
- The industry standard, Belltech drop spindles can be combined with coilover or air suspension set ups for the ultimate in street performance or frame laying stance. Lifetime warranty, direct bolt in, application specific.
P311-46F8E05 2102 Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2003 Chevrolet Blazer | LS | 2 | Sport Utility | RWD | United States | N/R | N/R | V | 6 Cyl 4.3L | 262 | - |
- STREET PERFORMANCE (FRONT, LOWERED)
- Lowering Rate: F: 0.0-3.0"
- Shocks features include: Metal dust boots, Hardened Chrome 15mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings.
P311-53C879F 2104HA Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1980 Chevrolet K5 Blazer | Cheyenne | 2 | Sport Utility | RWD | United States | N/R | N/R | Front | L | 6 Cyl 4.1L | 250 | - |
- STREET PERFORMANCE (FRONT, LOWERED)
- 6: When using front shock number 10102I or 10103I installation from top side of lower control arm or modification to shock opening may be ness. Lowering Rate: F: 0.0"
- Shocks features include: Metal dust boots, Hardened Chrome 15mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings.
P311-53C879F 2104HA Bell Tech New
| Vehicle | Submodel | Doors | Body | Region | Bed Length | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|
| 1975 Chevrolet C30 | Custom Deluxe | 4 | Crew Cab Pickup | United States | 96.0 | Front | V | 8 Cyl 5.7L | 350 | - |
- STREET PERFORMANCE (FRONT, LOWERED)
- Lowering Rate: Lowering Rate: F: 0.0-3.0"
- Shocks features include: Metal dust boots, Hardened Chrome 15mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings.
P311-53C879F 2104HA Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1975 Chevrolet C10 | Scottsdale | 2 | Standard Cab Pickup | RWD | United States | 78.0 | Stepside | Front | V | 8 Cyl 5.7L | 350 | - |
- Independent Compression & Rebound Adjustable Dampers
- Lowering Rate: R: 0.0-6.0"
- Unleash your trucks potential! Belltech coilover kits offer a out of the box, ready to install, height adjustable solution to replace your lackluster underwhelming stock strut suspension.
P311-0695562 17000 Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Bed | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2015 Ford F-150 | XL | 4 | Crew Cab Pickup | RWD | United States | 67.1 | Fleetside | Rear | V | 6 Cyl 2.7L | 164 | - |
- 2" Drop Lower Ball Joint Kit
- Lowering Rate: F: 2.0"
- Lifetime warranty, direct bolt in, providing a 2" drop. Does not work on 4wd or torsion bar equipped models
P311-0CBCD40 2103 Bell Tech New
| Vehicle | Submodel | Doors | Body | Drive Type | Region | Bed Length | Position | Block | Engine | CID | CC |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2004 GMC Canyon | Z85 SL | 2 | Standard Cab Pickup | RWD | United States | 72.8 | Front | L | 5 Cyl 3.5L | 211 | 3460 |
